Network design and gateway setup
Gateway configuration, secure routing and a network laid out around how your business actually works, documented from day one.
Ubiquiti UniFi
UniFi networks, built and locked down
We design, install and secure Ubiquiti UniFi for Arizona businesses: gateways, switching, VLANs, Wi-Fi and VPN, set up onsite by our own engineers and managed end to end so your network just works.
🛡 UniFi Specialists⏱ Onsite Across the Valley💰 Flat Rate Quotes★ 20+ Years Networking
Why UniFi
One platform for the whole network
Orca IT Solutions designs, installs and secures Ubiquiti UniFi networks for businesses across Gilbert, Chandler, Mesa, Tempe, Scottsdale, Phoenix and the rest of the East Valley. UniFi puts the gateway, switches, Wi-Fi and cameras behind one dashboard without per-device licensing, which makes it a strong fit for offices of five to two hundred people.
The hardware is the easy part. What decides whether a UniFi network is fast and safe is the configuration: how traffic is segmented, which rules sit on the firewall, how remote access works and whether anyone keeps the firmware current. That is where we spend our time.
Where most UniFi installs fall short
We are often called in after a quick install. The usual findings are the same: one flat network with guests, staff and payment terminals side by side, factory default firewall settings, port forwards left open for remote access, and firmware that has not been touched since the day it went in. Each one is fixable without replacing working hardware.
Taking over an existing UniFi network
If you already run UniFi, we start with an audit. We document what is there, clean up the configuration, close the security gaps and then support it on an ongoing basis. You keep the controller, the credentials and the documentation.
Built for Arizona buildings
Stucco over wire lath, block walls and tile all eat wireless signal, so access point placement comes from measurement, not a floor plan. Our Wi-Fi design page explains how we survey, and our business networking page covers cabling and switching.
A network is only as good as the way it is configured and secured.Orca IT, Gilbert AZ
What We Do
End-to-end UniFi, done properly
From the first network diagram to ongoing support, we handle every layer of a Ubiquiti deployment so nothing is left half-configured.
UniFi switching and VLANs
Managed switches, VLAN segmentation and tidy structured cabling, so traffic stays fast, organized and isolated.
UniFi Wi-Fi design and install
Access points placed from a site survey, not a guess, for strong coverage and clean roaming in every room.
Firewall and threat management
Real firewall rules, intrusion detection and segmentation in place of the factory defaults most installs are left on.
Secure remote access and VPN
Site-to-site and remote-worker VPNs, so staff connect securely from anywhere with no risky open ports.
Monitoring, firmware and support
Proactive monitoring, firmware updates and the same engineers on every call, keeping the network healthy and current.
How It Works
From first call to a network you can forget about
01
Assess and plan
We walk the space, learn how your team works and review any existing gear, then design the right UniFi layout with no guesswork.
02
Install and configure
Gateways, switches and access points go in cleanly, with every device configured, named and documented.
03
Secure and test
We segment and harden the network, then test coverage, roaming and throughput from end to end.
04
Support and optimize
We monitor, patch and fine-tune the network so it keeps performing as your business grows.
Worried your UniFi network is not secure?
We review your firewall, segmentation, Wi-Fi and remote access, then give you a clear, honest assessment with no obligation.
Why Orca
Why businesses trust us with UniFi
Six habits that separate a designed, secured network from a box of access points.
UniFi is everyday work
We design, deploy and secure UniFi networks week in and week out, so the edge cases are familiar rather than a learning exercise on your network.
Segmented by default
Staff, guests, payment terminals, cameras and smart devices each get their own network, so a problem in one cannot reach the rest.
No open ports
Remote access runs over encrypted VPN. We close the port forwards that most quick installs leave behind.
Firmware kept current
Gateways, switches and access points are updated on a schedule, so known vulnerabilities actually get closed.
Documented and yours
Network diagrams, credentials and the controller belong to you. Nothing is held hostage if you ever move on.
The same engineers
The people who installed your network are the ones who answer when you call. We never outsource.
Service Area
UniFi installation onsite across the Valley
We install and support Ubiquiti UniFi networks onsite in Gilbert, Chandler, Mesa, Tempe, Scottsdale, Phoenix, Ahwatukee, Queen Creek, San Tan Valley, Apache Junction and Maricopa, Arizona. Monitoring, firmware updates and most configuration work are handled remotely, so we also manage UniFi networks for businesses anywhere in the United States.
Ubiquiti and UniFi are trademarks of Ubiquiti Inc. Orca IT Solutions is an independent IT provider.
Ubiquiti UniFi questions
Do you install and configure Ubiquiti UniFi for businesses?
Yes. Designing, installing and securing Ubiquiti UniFi networks for businesses is a core specialty. We handle the gateway, switching, VLANs, Wi-Fi, VPN and monitoring as one properly configured system, onsite across the Phoenix metro and remotely anywhere in the United States.
Can you secure our UniFi network?
Yes. We replace factory defaults with real firewall rules, turn on and tune threat management, segment staff, guest, payment and device traffic onto separate VLANs, set up encrypted VPN access instead of open ports, harden the Wi-Fi and keep firmware current.
Do you set up UniFi Wi-Fi for offices and warehouses?
Yes. We measure the building first, then plan access point count, placement, mounting height and channels so coverage and roaming hold up in real use, from a single suite to a multi-building site or a high-ceiling warehouse.
Can you take over or fix an existing UniFi setup?
Yes, and it is a large part of the work we do. We audit what is there, clean up the configuration, close the security gaps, document everything and then support it going forward. You do not need to replace working hardware to switch to us.
Can you manage our UniFi network remotely?
Yes. Monitoring, alerting, firmware updates and most configuration changes are handled remotely by the same engineers who installed it. We come onsite when hands are needed on the hardware or the cabling.
Which areas do you serve onsite for UniFi work?
Gilbert, Chandler, Mesa, Tempe, Scottsdale, Phoenix, Ahwatukee, Queen Creek, San Tan Valley, Apache Junction and Maricopa, Arizona. UniFi networks outside that area are supported remotely.
How is UniFi work priced?
Every project is quoted at a flat rate after a free assessment, and the price is agreed before any work begins. Ongoing monitoring and support can be included in a Pod Care plan.
Book a UniFi assessment
A walk through your space and your current setup, then a clear plan and a flat price agreed before any work begins.
Talk to Your Pod
Let’s build your business network
Tell us about your space and your current setup. We follow up with a clear plan and a flat price agreed before any work begins, with no obligation.
(602) 677-0779Family owned in Gilbert, AZ since 2015 · onsite across the Phoenix metro · remote support nationwide · never outsourced
Same-day response
No long contracts
Flat, honest pricing
Five-star service
Get your free IT consultation
A few details and your pod gets right back to you, usually the same business day.